Heat Pump Installation in Roseville, CA
A heat pump in Roseville has to be sized, ducted, and wired for both seasons.
- Licensed technicians
- Diagnostic-first
- Written options
- Utilities
- Roseville Electric Utility electric / PG&E gas
- Permits
- City of Roseville Development Services — Building (Permit Center)
- Rebates
- Heat-pump rebate channel: Roseville Electric Heat Pump HVAC rebate (verify current terms)
- Duct test
- Roseville Electric HERS / Title 24 duct verification on qualifying heat-pump jobs
What is different about heat pump installs in Roseville?
Roseville heat-pump installation is defined by Roseville Electric's rebate: multi-stage equipment and ducts that pass Title 24 via HERS CF3R. Leaky ducts fail the rebate. That is why duct testing is not optional here the way it can be waved through on a SMUD-only sales pitch. SMUD programs do not apply. Gas is still PG&E if dual-fuel backup is in play. City quick permit through the Permit Center. West Roseville two-stories need Manual J and balance. Roseville listed the rebate as open when checked on 2026-10-06; the posted PDF application is the 2025 version, which ran first-come until funds were depleted. 916air will not promise an amount or that the ducts will pass until they are tested.
What we check on the visit:
- Manual J that balances summer cooling load and winter heating load
- Duct leakage and static pressure — a new heat pump cannot fix leaky attic runs
- Electrical panel and circuit capacity for a heat-pump compressor
- Utility rebate channel for this exact address — never assumed
- Whether backup heat should be electric strips, dual-fuel gas, or neither
How is a heat pump install planned?
A heat pump install only pays off if it is sized to the home, matched to the ducts, and backed by adequate electrical capacity. We check all three, then walk through the rebate channel that actually applies to the address — without promising an amount. After the visit, options go in writing, and work does not start until you pick a path.
Written options
Example- 1.Repair the failed partA scary symptom is sometimes a small part.
- 2.Repair plus a related weaknessThe failure, plus the weak spot found on the same visit.
- 3.ReplaceWhen age, repair cost, refrigerant, and comfort math support it.
Do I need a permit to install a heat pump in Roseville?
Yes. Installing or replacing a heat pump in Roseville is permitted work, filed with City of Roseville Development Services — Building (Permit Center) (opens in new tab). Roseville is an incorporated city in Placer County, so the permit comes from the city, not the County. HVAC and duct change-outs are a 'quick permit' through the city's Permit Center.
Who files the permit is confirmed in the written scope, and a change-out is never treated as a no-permit favor. The Sacramento HVAC permit guide maps city versus county rules across the region.
- Jurisdiction
- City of Roseville
Which heat-pump rebate applies in Roseville?
Roseville Electric's own rebate, not SMUD's. SMUD programs do not apply at a Roseville address. Roseville runs its own city-owned municipal electric utility — not SMUD and not PG&E. SMUD rebate programs do not apply here.
Roseville Electric offers its own heat-pump HVAC rebate that requires a multi-stage system and ductwork passing Title 24 via HERS CF3R verification. Roseville lists it as open as of 2026-10-06; the posted PDF application is the 2025 version, which processed applications first-come until funds were depleted. Confirm the current form and amounts before relying on them. Check Roseville Electric's rebate page (opens in new tab) and our rebates and financing guide. 916air does not promise an amount, or that ducts will pass the HERS test before they are tested.
- Electric
- Roseville Electric Utility
- Gas
- PG&E
- Heat-pump rebates
- Roseville Electric Heat Pump HVAC rebate
What should you decide before the change-out?
Four things: the load calculation, whether the ducts can carry the new system, electrical capacity, and the permit path. Equipment, labor, and permit responsibility go in writing before anything is ordered. The HVAC cost calculator gives a planning range, not a quote. If the ducts are the weak point, start with Duct Repair & Airflow in Roseville.
Related services in Roseville
When the heat pump is not the whole story, these Roseville services cover the next step.
Keep exploring
More Roseville services
- AC Repair in Roseville
- AC Installation & Replacement in Roseville
- Duct Repair & Airflow in Roseville
- AC Tune-Up & Maintenance in Roseville
- Furnace Repair in Roseville
- Furnace Installation & Replacement in Roseville
- Heat Pump Repair in Roseville
- Ductless Mini-Split Installation in Roseville
- Indoor Air Quality in Roseville
- Thermostat Repair & Installation in Roseville
Heat Pump Install nearby
Nearby service areas in Placer County
Roseville Heat Pump Install questions
Do you handle heat pump installation in Roseville?
Yes. 916air serves Roseville in Placer County. Send the problem and the address, and the visit or estimate is booked from there.
Which utility serves Roseville, and does it change the heat pump choice?
Power is Roseville Electric Utility and gas is PG&E. It sets the rebate channel: the Roseville Electric Heat Pump HVAC rebate, and SMUD programs do not apply.
What does a written heat pump estimate in Roseville include?
The Manual J load size, duct and electrical notes, the equipment and its refrigerant, who files the permit with City of Roseville Development Services — Building (Permit Center), and any rebate to verify. Nothing is ordered before you pick an option.
What should I have ready when I request heat pump installation in Roseville?
The symptom or goal, the address, the equipment's age if you know it, and how urgent it is. The address confirms the permit office (the City of Roseville) and the utility before anyone arrives.
Get a heat pump installation estimate in Roseville
Send the details and we'll come back with a written, site-specific scope.